Built for a tropical climate
A breathable elastomeric coat that bridges cracks and adds years to a building. It stays flexible, so the hairline movement that opens up every monsoon doesn’t turn into a leak.
Waterproof, UV resistant, anti-microbial, and it reflects heat rather than holding it. Formulated here for the weather we actually get.
Where to use it
Terraces, roof slabs, exterior walls, parapets, chajjas, and interior damp walls.
Why it lasts
Waterproof barrier
Bridges cracks and keeps water out, through every monsoon.
Anti-microbial
Resists the algae and fungal growth that discolours exterior walls here.
Cool coat
Reflects heat instead of holding it, so the surface underneath stays cooler.
Green chemistry
Low-impact formulation, breathable rather than sealed.
The details
| Coverage — walls | 30–35 sq ft per litre |
| Coverage — roofs | 20–25 sq ft per litre |
| Pack sizes | 5 L, 10L and 20 L |
| Minimum coats | Two |
| Durability | 10 years |
| Shelf life | 12 months |
How to apply
| 1 — Prime | Ferrocon Primer. Wait 3 hours. |
| 2 — Coat | Elastomeric Coat, undiluted. Wait 6 hours. |
| 3 — Re-coat | Elastomeric Coat, undiluted. Wait 6 hours. |
See the difference
How much will you need?
Estimate what you need
- Packs to order
- —
- Coverage used
- —
An estimate, not a quotation. Coverage varies with substrate porosity, texture and application method — confirm with us before ordering.
Questions
Yes. Ferrocon Primer, three hours before the first coat.
Yes — it’s breathable, so it works on interior damp walls as well as exteriors.
Ten years on a properly prepared surface with two coats.
Twelve months. Keep it away from children.